IS MP.1
The IS MP.1 is a handheld reader for easy and efficient reading of RFID/NFC TAGs that are located closely together or positioned in areas that are difficult to access. The TAG information can be viewed directly on the OLED display, transferred via Bluetooth or read the storage via USB.
ADVANTAGES
- Bluetooth® 4.0 LE
- vibration feedback
- OLED-Display
- memory for 1000 readings
- battery capacity for 2000 Bluetooth readings
- real-time clock
- apps with remote use available
APPROVALS
- ATEX Zone 1/21
- II 2G Ex ib IIC T4 Gb
- II 2D Ex ib IIIC T135°C Db IP6X
- IECEx Zone 1/21
- Ex ib IIC T4 Gb
- Ex ib IIIC T135°C Db IP6X
IS MP.2
The IS MP.2 is a handheld reader for easy and efficient reading of RFID/NFC TAGs that are located closely together or positioned in areas that are difficult to access. The TAG information can be viewed directly on the OLED display, transferred via Bluetooth or read the storage via USB.
ADVANTAGES
- Bluetooth® 4.0 LE
- vibration feedback
- OLED-Display
- memory for 1000 readings
- battery capacity for 2000 Bluetooth readings
- real-time clock
- apps with remote use available
APPROVALS
- ATEX zone 2/22
- II 3G Ex ic IIC T4 Gc IP54
- II 3D Ex ic IIIB T135°C Dc IP54
- IECEx zone 2/22
- Ex ic IIC T4 Gc IP54
- Ex ic IIIB T135°C Dc IP54
iRFID500
The Extronics iRFID500 is an intrinsically safe handheld Bluetooth UHF RFID passive tag reader, designed for use in hazardous areas and 
harsh environments such as offshore, marine, chemical, and industrial environments. The iRFID500 is certified for use in ATEX and IECEx Zones 1, 2, 21, and 22.
Personalisation
- Companion software for Android & Apple OS is available
- Enables personalisation of the iRFID500, such as altering read ranges to distinguish tags that are close together
Dual mode operation
Greater flexibility of usage:
- Link directly with smart devices, such as the Extronics Rough Pro, using Bluetooth capability
- Or, use as a standalone device with the large internal memory storing the tag reads
Availability
- ATEX and IECEx certification is pending, expected end of Q4 2015
- MET expected end of Q1 2016
Intrinsically Safe Barcode Scanner / RFID Reader: Ident-Ex® 01
Description
To cover all technologies such as 1D, 2D & RFID, the Ident-Ex® 01 can be connected via Bluetooth® to any generic device.
Features
- Ultra-rugged
- Outstanding head modules performances
- Easy to use, with one hand
- Pairable with any Bluetooth device
- Flexibility – online / offline scanning & changeable head modules
- Lower risk interface to ecom products
- Lower cost – prevents legacy tag replacement
- Ideal for intensive scanning and 12 hour shifts
- Lower damage / fouling risk = lower downtime risk
- Improved global safety & lower inventory cost
- Optional Service Level Agreement 3 years (SLA)
Technical Data
| Dimensions | 221 x 84 x 58mm; 235 x 84 x 58mm (Ex-25 head module) |
| Weight | 425-560 g (depends on head module) |
| Battery | Li-Ion rechargeable; 12+ hours; 10.000+ scans with one battery charge |
| Internal Storage | 2 MBytes; 2D QR barcodes = 600+; RFID1 tags (ID only) = 5000+ |
| Bluetooth® | Class II, up to approx. 10 meters |
| Scan performance | RFID1 = up to 1.5m | Barcode = 15cm to 15m |
Scope of Delivery
- Ident-Ex® 01
- Head module
- Charging cable
- Travel charger
- Instruction manual
- Safety instructions
Data sheet ident-ex-01
Intrinsically Safe Passive RFID Tags
LF/HF/NFC/UHF RFID Transponder / TAGs Ex Zone 1 / 21
certified RFID TAGs could be used also outside Europe because of the achievement of IECEx™ certification. The IECEx™ certification system is an international accepted independent organisation with the philosophy to make the use of devices in hazardous area easier. Users and system integrators have to check independent of it the area specific legal requirements.
ATEX Zone 1 / 21 certified 34 mm TEC PU NFC TAG
The ATEX Zone 1 / 21 certified 34 mm TEC PU NFC TAG can be permanently affixed at the object which has to be identified by using the centre mounting hole by means of screw or rivet. As well the mounting hole provides the possibility to use a cable tie or metal steel wire to mount the tag on valves or machine equipment in rugged hazardous area environment. The industrial NFC TAG can be read or programmed by NFC enabled phones, smartphones or rugged industrial ISO14443 compatible PDAs or tablet PCs.
Features
- Robust housing for rugged industrial environment
- Centre hole for easy mounting
- Standard colours black, blue, red and yellow, other colours are available on request.
- Also available as industrial version for safe area application.
- NDEF
- NFC Forum Type 2 compatible
- ISO14443 compatible
- Read range (tested with smartphone Galaxy™ Nexus™) mounted on metal ca. 10 mm
