HMi Elements 1901-Z1
HMi Elements 1901-Z1
- Lightweight ATEX, IECEx, CSA and AEx wireless access point
- Certified* for use in in Class I Zone 1
- Tri-band wireless Wi-Fi IEEE 802.11a/b/g/h & Super AG
- Up to 108Mbps ( Super AG mode)
- 4/128 bit WEP, WPA-PSK, WPA2-PSK, IEEE 802.1X (RADIUS) authentication
- MAC address filtering, SSID broadcast control
The 1901-Z1 Wi-Fi Access Point is designed to be operated within a hazardous area.
- ATEX Zone 1 or 2, IECEx, CSA and AEx certified Class I Zone 1 Wireless Access Point
- No need for heavy, and expensive Ex d solution
- Can be used as Access Point, Bridge or repeater
- Fully configurable to meet statutory Wi-Fi requirements worldwide
- Quick and easy set-up
- Intrinsically safe antenna and Ethernet 10/100 Mbps ports
- Inexpensive way to extend your WiFi network into a hazardous area.
| iSiS1901 : | |||||||
|---|---|---|---|---|---|---|---|
| TYPICAL EX CODE | Ex II (2) G D Ex e mb ib [ib Gb] IIB T4 Gb Ex tb IIIB T135°C Db IP66Class I, Zone 1, AEx e mb ib [ib Gb] IIB T4 Gb Zone 21 Ex tb IIIB T135°C Db IP66 |
||||||
| POWER REQUIREMENTS | 100 – 240V, 50/60Hz AC, current consumption 0.1A for 230V AC input, 0.2A for 120V AC input | ||||||
| OPERATING TEMPERATURE | -40°C to +60°C (-40°F to +140°F) | ||||||
| STORAGE TEMPERATURE | -40°C to +70°C (-40°F to +158°F) | ||||||
| INGRESS PROTECTION | IP66 / NEMA 4X | ||||||
| INTERFACE | IS Ethernet and power via glands IS antenna output |
||||||
| MAXIMUM TRANSMIT OUTPUT POWER | 20dBm (100mW) | ||||||
| RECEIVER SENSITIVITY |
|
||||||
| RADIO LINK | Tri-band wireless Wi-Fi IEEE 802.11a/b/g/h & Super AG | ||||||
| RADIO DATA RATE | Up to 108Mbps ( Super AG mode) | ||||||
| SECURITY | 4/128 bit WEP, WPA-PSK, WPA2-PSK, IEEE 802.1X (RADIUS) authentication, MAC address filtering, SSID broadcast control | ||||||
| WEIGHT & SIZE | 5.4kg / 12lbs 232(h) x 202(w) x 111(d) mm (9.13 x 7.95 x 4.37 inches) |