UltraXL
ATEX Zone 1 / 21 LED Floodlight
UltraXL
ATEX Zone 1 / 21 LED Floodlight
Key Features
- ATEX Zone 1 / 21 Certified
- 3200 Lumen
- 12 Hour Operating Time
- Maintenance-Free 260Wh Battery
- 6kg Weight
- IP65 Rated
Certification
ATEX Certification
II II 2 G Ex eb ib IIC T4 Gb
II 2 D Ex ib tb IIIC T135°C Db
INCLUDED
Product number | 6062400 |
Watts | 23W |
Source | 81 LEDs, 5000°K |
Lumen | 3200 |
Operating time | 12 (twelve!) h. |
Chargetime | up to 9 h. |
Battery | Lithium Polymer (LiPo) 260Wh. |
Composition | Throughout antistatic polypropylene, metal frame, stainless steel bolts. |
Lens materials | Scratch and chemical resistant hardened glass with safety and diffusor foil |
Design | • By design easy to handle, also with gloves on. • By design easy stackable to save space. |
Dimensions | 388 x 319 x 147 mm |
Weight | Only 6kg |
Ingress protection level | IP65 |
Product category | 2 |
Ex-marking gas | II 2 G Ex eb ib IIC T4 Gb |
Ex-marking dust | II 2 D Ex ib tb IIIC T135°C Db |
Zones | 1, 2, 21 and 22 |
Ambient temperature | -20 ̊C to +45 ̊C |
Eye safety | Complies with photobiologicalsafety as defined in the IEC 62471 standard. |
Conformity | 2014/34/EU (ATEX) 2014/30/EU (EMC) |
Applicable standards | EN 60079-0:2018 EN 60079-7:2015 + A1:2018 EN 60079-11:2023 EN 60079-31:2014 |
Charger | Floodlight supplied with charger. It includes a number of adaptors that can be used in European wall sockets. |
Supply voltage charger | 100 to 240 VAC, 50/60 Hz |
Charging | Charging only in safe area. |
Ultra Subframe
Handy to keep the lamp slightly off the ground and to aim it more precisely. The adjusting knob is designed for use with one hand only -keeping the other hand free. As a standalone item the sub frame helps to position the light towards the object: it gives the possibility to tilt the lamp up to even 270 degrees. Adjustment to the desired angle through one knob: easy operation even with gloves on.
Leather Carry Case
A must when walking and climbing on the plant. Keep your hands free with this poach. The carry case is made for ATEX zones from real leather and stainless steel fittings. Climb a ladder with your hands free, and carry the lamp in the custom made leather pouch on your shoulder. Full grain leather of 2.5 mm. including leather strap. Buckles and metal parts in stainless steel. Side pocket for charger.
Magnetic Base
Three strong magnets connected to a stainless steel frame. The magnets are covered to avoid sparking and are flexibly connected to the frame to adjust automatically to curved, bumpy or rusty surfaces.